// ============================================================================
//  Kidsbox — parametric 3D-printable enclosure
//  ---------------------------------------------------------------------------
//  Open in OpenSCAD and set `part` (top-right) or export from the CLI:
//
//    openscad -D 'part="body"'            -o stl/body.stl            kidsbox.scad
//    openscad -D 'part="lid"'             -o stl/lid.stl             kidsbox.scad
//    openscad -D 'part="speaker_adapter"' -o stl/speaker_adapter.stl kidsbox.scad
//    openscad -D 'part="grill"'           -o stl/grill.stl           kidsbox.scad
//
//  `part="assembly"` shows everything together (for preview only).
//  All tunables live in params.scad.
// ============================================================================

include <params.scad>
use     <lib.scad>

part = "assembly";   // body | lid | speaker_adapter | grill | assembly

// ---------------------------------------------------------------------------
//  Front-panel speaker interface (the FIXED "mount for the speaker mount")
// ---------------------------------------------------------------------------

// Subtractive: the sound opening + an outer recess for the grill flange.
module speaker_cut(cx, cz) {
    translate([cx, 0, cz]) rotate([-90, 0, 0]) {
        // sound opening straight through the front wall
        translate([0, 0, -1]) cylinder(h = wall + 2, d = spk_sound_d);
        // grill flange recess on the OUTSIDE face
        translate([0, 0, -0.01]) cylinder(h = grill_t + 0.01, d = spk_sound_d + 8);
    }
}

// Additive: 4 bosses on the INSIDE so a swappable adapter can bolt on.
module speaker_bosses(cx, cz) {
    translate([cx, 0, cz]) rotate([-90, 0, 0])
        translate([0, 0, wall - 0.5])
            bolt_circle(spk_bolt_d, spk_bolt_count, 45)
                boss(spk_boss_d, spk_boss_h + 0.5, 2.6);   // self-tap for M3
}

// ---------------------------------------------------------------------------
//  Button holes through the lid (row near the front edge)
// ---------------------------------------------------------------------------
module button_cuts() {
    for (i = [0 : btn_count - 1]) {
        x = box_w/2 + (i - (btn_count - 1) / 2) * btn_pitch;
        translate([x, btn_row_y, box_h - 1])
            cylinder(h = lid_t + 2, d = btn_d);
    }
}

// ---------------------------------------------------------------------------
//  Side ports: USB/charge (right wall) and power switch (left wall)
// ---------------------------------------------------------------------------
module side_ports() {
    // USB on +X wall
    translate([box_w - wall - 1, box_d * 0.30, usb_center_z])
        cube([wall + 2, usb_w, usb_h], center = false);
    // power switch on -X wall
    translate([-1, box_d * 0.30, sw_center_z]) rotate([0, 90, 0])
        cylinder(h = wall + 2, d = sw_d);
}

// ---------------------------------------------------------------------------
//  Ventilation slots on the back wall (+Y)
// ---------------------------------------------------------------------------
module vents() {
    total = (vent_count - 1) * (vent_slot_w + 4);
    for (i = [0 : vent_count - 1]) {
        x = box_w/2 - total/2 + i * (vent_slot_w + 4);
        translate([x, box_d - wall - 1, box_h * 0.55])
            cube([vent_slot_w, wall + 2, vent_slot_len]);
    }
}

// ---------------------------------------------------------------------------
//  Internal mounts
// ---------------------------------------------------------------------------

// Corner posts the lid screws into (fused into the wall corners, top-anchored).
module lid_bosses() {
    boss_len = lid_rim_h + 10;
    for (sx = [lid_boss_inset, box_w - lid_boss_inset],
         sy = [lid_boss_inset, box_d - lid_boss_inset])
        translate([sx, sy, box_h - boss_len])
            boss(lid_boss_d, boss_len, lid_screw_d - 0.6);  // self-tap
}

// ESP32-LyraT standoffs (board lies flat on the floor, toward the back).
lyrat_cx = box_w/2;
lyrat_cy = box_d - lyrat_d/2 - 10;
module lyrat_standoffs() {
    for (sx = [-lyrat_hole_dx/2, lyrat_hole_dx/2],
         sy = [-lyrat_hole_dy/2, lyrat_hole_dy/2])
        translate([lyrat_cx + sx, lyrat_cy + sy, floor_t])
            boss(lyrat_standoff_d, lyrat_standoff_h, lyrat_screw_d);
}

// 2x 18650 battery cradle (open-top tray with end stops + clips), front-left.
batt_cx = box_w/2;
batt_cy = wall + batt_holder_d/2 + 4;
module battery_cradle() {
    ow = batt_holder_w + 2*batt_wall;
    od = batt_holder_d + 2*batt_wall;
    translate([batt_cx - ow/2, batt_cy - od/2, floor_t])
    difference() {
        cube([ow, od, batt_holder_h]);
        // hollow pocket, open top
        translate([batt_wall, batt_wall, batt_wall])
            cube([batt_holder_w, batt_holder_d, batt_holder_h]);
        // cable notch in the front wall of the cradle
        translate([ow/2 - 6, -1, batt_holder_h - 8])
            cube([12, batt_wall + 2, 10]);
    }
    if (batt_clip) {
        // two retaining lips along the long sides
        for (sy = [batt_cy - od/2 + batt_wall/2, batt_cy + od/2 - batt_wall/2])
            translate([batt_cx - batt_holder_w/3, sy, floor_t + batt_holder_h])
                rotate([0, 0, 0])
                    cube([batt_holder_w*2/3, batt_wall, 2.5], center = false);
    }
}

// ---------------------------------------------------------------------------
//  BODY
// ---------------------------------------------------------------------------
module body() {
    spk_l = box_w/2 - spk_spacing/2;
    spk_r = box_w/2 + spk_spacing/2;

    difference() {
        union() {
            shell([box_w, box_d, box_h], corner_r, wall, floor_t);
            speaker_bosses(spk_l, spk_center_z);
            speaker_bosses(spk_r, spk_center_z);
            lid_bosses();
            lyrat_standoffs();
            battery_cradle();
        }
        speaker_cut(spk_l, spk_center_z);
        speaker_cut(spk_r, spk_center_z);
        side_ports();
        vents();
    }
}

// ---------------------------------------------------------------------------
//  LID  (NFC reader sits underneath; print thin-side up)
// ---------------------------------------------------------------------------

// RC522 pocket posts on the lid underside.
module rc522_mount() {
    // board centred, posts hang DOWN from the lid underside (local -Z here)
    bx = 54; by = 34;  // RC522 mounting-hole rectangle (verify)
    for (sx = [-bx/2, bx/2], sy = [-by/2, by/2])
        translate([sx, sy, -8])
            cylinder(h = 8, d = 6);
    // pilot holes
    for (sx = [-bx/2, bx/2], sy = [-by/2, by/2])
        translate([sx, sy, -8.5])
            cylinder(h = 9, d = 2.4);
}

module lid() {
    difference() {
        union() {
            // top plate sitting on the wall tops
            translate([box_w/2, box_d/2, box_h])
                linear_extrude(lid_t)
                    rrect(box_w, box_d, corner_r);
            // locating lip dropping into the interior
            translate([box_w/2, box_d/2, box_h - lid_rim_h])
                linear_extrude(lid_rim_h)
                    difference() {
                        rrect(inner_w - 2*fit, inner_d - 2*fit, max(0.1, corner_r - wall));
                        rrect(inner_w - 2*fit - 2*lid_rim_t,
                              inner_d - 2*fit - 2*lid_rim_t,
                              max(0.1, corner_r - wall - lid_rim_t));
                    }
            // RC522 mount, centred under the lid
            translate([box_w/2, box_d/2, box_h + lid_t]) rc522_mount();
        }
        // corner screw holes (countersunk) through the plate
        for (sx = [lid_boss_inset, box_w - lid_boss_inset],
             sy = [lid_boss_inset, box_d - lid_boss_inset]) {
            translate([sx, sy, box_h - 0.5])
                cylinder(h = lid_t + 1, d = lid_screw_d);
            translate([sx, sy, box_h + lid_t - 1.4])
                cylinder(h = 1.6, d1 = lid_screw_d, d2 = lid_screw_d + 3.5);
        }
        // button holes near the front edge
        button_cuts();
    }
}

// ---------------------------------------------------------------------------
//  SWAPPABLE SPEAKER ADAPTER  (print one per speaker model)
// ---------------------------------------------------------------------------
module speaker_adapter() {
    difference() {
        union() {
            cylinder(h = adapter_t, d = adapter_outer_d);
            // frame seat ring raised on the back so the speaker locates
            translate([0, 0, adapter_t])
                ring(spk_frame_d + 6, spk_cutout_d, spk_frame_seat);
        }
        // cone clearance
        translate([0, 0, -0.5]) cylinder(h = adapter_t + spk_frame_seat + 1, d = spk_cutout_d);
        // speaker frame recess on the back
        translate([0, 0, adapter_t - 0.01])
            cylinder(h = spk_frame_seat + 0.02, d = spk_frame_d);
        // mounting holes to the panel bosses (FIXED interface)
        bolt_circle(spk_bolt_d, spk_bolt_count, 45)
            translate([0, 0, -0.5]) cylinder(h = adapter_t + spk_frame_seat + 1, d = spk_bolt_hole_d);
        // the speaker's OWN screw holes (swappable per model)
        bolt_circle(spk_screw_bolt_d, spk_screw_count, 0)
            translate([0, 0, -0.5]) cylinder(h = adapter_t + spk_frame_seat + 1, d = spk_screw_d);
    }
}

// ---------------------------------------------------------------------------
//  SPEAKER GRILL  (snaps into the sound opening)
// ---------------------------------------------------------------------------
module grill() {
    r_out = spk_sound_d/2;
    union() {
        // outer flange that seats in the panel recess
        ring(spk_sound_d + 8, spk_sound_d - 4, grill_t);
        // friction lip into the hole
        translate([0, 0, -grill_lip_h])
            ring(spk_sound_d - 2*fit, spk_sound_d - 2*fit - 3, grill_lip_h + grill_t);
        // concentric rings
        for (i = [1 : grill_rings])
            ring(2*r_out * i/(grill_rings+1) + 1.4,
                 2*r_out * i/(grill_rings+1) - 1.4, grill_t);
        // central hub
        cylinder(h = grill_t, d = 6);
        // radial spokes
        for (i = [0 : grill_spokes - 1])
            rotate([0, 0, i * 360/grill_spokes])
                translate([0, -1.0, 0]) cube([r_out, 2.0, grill_t]);
    }
}

// ---------------------------------------------------------------------------
//  ASSEMBLY PREVIEW
// ---------------------------------------------------------------------------
explode = 45;   // lid lift for the exploded preview (0 = closed)

module assembly() {
    spk_l = box_w/2 - spk_spacing/2;
    spk_r = box_w/2 + spk_spacing/2;
    color("WhiteSmoke")  body();
    color("Gainsboro")   translate([0, 0, explode]) lid();
    for (cx = [spk_l, spk_r]) {
        // adapter just inside the front wall
        color("SteelBlue")
            translate([cx, wall + adapter_t, spk_center_z]) rotate([90, 0, 0])
                speaker_adapter();
        // grill in the opening
        color("DimGray")
            translate([cx, grill_t, spk_center_z]) rotate([-90, 0, 0])
                grill();
    }
}

// ---------------------------------------------------------------------------
//  DISPATCH
// ---------------------------------------------------------------------------
if      (part == "body")            body();
else if (part == "lid")             lid();
else if (part == "speaker_adapter") speaker_adapter();
else if (part == "grill")           grill();
else                                assembly();